DSP的特點  ：

什么叫做DSP？DSP（digital Signal Processor）中文：數字信號處理器。

        對于沒有使用過DSP的初學者來說，第一個困惑就是DSP其他的嵌入式處理器究竟有什么不同，它和單片機，ARM有什么區別。事實上，DSP也是一種嵌入式處理器，它完全可以完成單片機的功能。 
        唯一的重要的區別在于DSP支持單時鐘周期的"乘-加"運算。這幾乎是所有廠家的DSP芯片的一個共有特征。幾乎所有的DSP處理器的指令集中都會有一條MAC指令，這條指令可以把兩個操作數從RAM中取出相乘，然后加到一個累加器中，所有這些操作都在一個時鐘周期內完成。擁有這樣一條指令的處理器就具備了DSP功能。 
       具有這條指令就稱之為數字信號處理器的原因在于，所有的數字信號處理算法中最為常見的算術操作就是"乘-加"。這是因?yàn)閿?shù)字信號處理中大量使用了內積，或稱"點積"的運算。無論是FIR濾波，F(xiàn)FT，信號相關，數字混頻，下變頻。所有這些數字信號處理的運算經常是將輸入信號與一個系數表或者與一個本地參考信號相乘然后積分（累加），這就表現為將兩個向量（或稱序列）進行點積，在編程上就變成將輸入的采樣放在一個循環buffer里，本地的系數表或參考信號也放在一個buffer里，然后使用兩個指針指向這兩個buffer。這樣就可以在一個loop里面使用一個MAC指令將二者進行點積運算。這樣的點積運算對與處理器來說是最快的，因?yàn)閮H需一個始終周期就可以完成一次乘加。 

了解DSP的這一特點后，當我們?cè)O(shè)計一個嵌入式系統時，首先要考慮處理器所實現的算法中是否有點積運算，即是否要經常進行兩個數組的乘加，（記住數字濾波，相關等都表現為兩個數組的點積）如果有的話，每秒要做多少次，這樣就能夠決定是否采用DSP，采用多高性能的DSP了。 

Figure Ov.4 illustrates an average digital signalprocessing system with dual tagless SRAMs on-chip,an off-chip programmable ROM (e.g., PROM, EPROM, flash ROM, etc.) that holds the executable image, and an off-chip DRAM that is used for computation and holding variable data. External memory and device controllers can be used, but many embedded microprocessors already have such controllers integrated onto the CPU die. This cuts down on the system’s die count and thus cost. Note that it would be possible for the entire hierarchy to lie on the CPU die, yielding a single-chip solution called a system-on-chip. This is relatively common for systems that have limited memory requirements. Many DSPs and microcontrollers have programmable ROM embedded within them. Larger systems that require megabytes of storage (e.g., in Cisco routers, the instruction code alone is more than a 12 MB) will have increasing numbers of memory chips in the system. 

  On the right side of Figure Ov.4 is the software’s view of the memory system. The primary distinction is that, unlike general-purpose systems, is that theSRAM caches are visible as separately addressable memories, whereas they are transparent to software in general-purpose systems.