接收機(jī)模擬分析軟件:1.?Copyright Statement?5
2.?Program Summary?5
2.1.?Introduction?5
2.2.?Receiver Description?6
2.3.?Features and limitations?7
2.4.?About the Program?7
3.?Building a Receiver?8
3.1.?Receiver Simulator Window?8
3.2.?Simulator File Menu?8
3.3.?Simulator Edit Menu?9
3.4.?Simulator View Menu?10
3.5.?Simulator Analysis Menu?10
3.6.?Simulator Help Menu?11
3.7.?Building a Simulation?11
3.8.?Receiver Modules Window?12
3.9.?Creating a new RF Module?13
3.10.?Editing an RF Module?13
3.11.?Receiver Analysis Menu?14
3.12.?Receiver View Menu?14
3.13.?Module Definition Dialog?15
3.14.?Module Edit Menu?15
3.15.?Module Analysis Menu?16
3.16.?Module View Menu?17
3.17.?Edit Element Dialog?17
3.18.?Creating a New Element?18
3.19.?Editing an Element?18
4.?Element Descriptions?18
4.1.?Basic Element Types?18
4.2.?Attenuator Element?19
4.3.?Amplifier Element?20
4.4.?AGC Amplifier Element?20
4.5.?Mixer Element?21
4.6.?Lowpass Filter Element?22
4.7.?Highpass Filter Element?23
4.8.?Bandpass Filter Element?23
4.9.?Preselector Element?24
4.10.?Switch Element?25
5.?Analysis?26
5.1.?Block Analysis Description?26
5.2.?Block Parameter Summary?27
5.3.?Expanded Block Parameters?27
5.4.?Cumulative Block Parameters?28
5.5.?Normalized Block Parameters?29
5.6.?Block Analysis Plots?30
5.7.?Gain Calculations?31
5.8.?Noise Figure Calculations?31
5.9.?Intercept Point Calculations?32
5.10.?Compression?33
5.11.?Bandwidth?33
5.12.?Single Signal Spurious Calculation?34
5.13.?Birdies?35
5.14.?Signal to Noise Ratio?36
5.15.?SNR Plot?37
5.16.?Bit Error Rate?37
5.17.?BER Plot?38
6.?Receiver Dialogs?39
6.1.?Element Dialogs?39
6.1.1.?Edit Element Dialog?39
6.1.2.?AGC Amplifier Dialog?40
6.1.3.?AGC Point Dialog?42
6.1.4.?Ampilfier Dialog?43
6.1.5.?Attenuator Dialog?44
6.1.6.?Bandpass Filter?45
6.1.7.?Highpass Dialog?46
6.1.8.?Lowpass Dialog?47
6.1.9.?Mixer Dialog?49
6.1.10.?Preselector Dialog?50
6.1.11.?Switch Dialog?52
6.2.?Module Dialogs?53
6.2.1.?Receiver Modules Dialog?53
6.2.2.?Module Definition Dialog?55
6.2.3.?Module Parameters Dialog?57
6.2.4.?Frequency Plan Dialog?59
6.2.5.?Local Oscillator Dialog?60
6.3.?Signal Dialogs?61
6.3.1.?Signal Description Dialog?61
6.3.2.?Modulation Dialog Dialog?62
6.4.?Receiver Characteristic Dialogs?64
6.4.1.?Main Simulator Window?64
6.4.2.?Front Panel Dialog?64
6.4.3.?Demodulator Dialog?66
6.4.4.?AGC Detector Dialog?67
6.5.?Analysis? Dialogs?68
6.5.1.?Plot Limits Dialog?68
6.5.2.?Spur Format Dialog?69
7.?Receiver Theory?70
7.1.?Noise Figure?70
7.2.?Intercept Points?71
7.3.?Third Order Distortion?71
7.4.?Second Order Distortion?72
7.5.?Second Harmonic Distortion?73
7.6.?Compression?73
7.7.?Frequency Plan?74
7.8.?IF Frequency Selection?74
7.9.?Injection Side Selection?75
7.10.?Spurious Responses?75
7.11.?Image Frequency?76
7.12.?IF Feedthrough?77
7.13.?RF Harmonics?77
7.14.?IF Spurs?77
7.15.?Crossover Spurs?78
7.16.?Crossover Spurs - High Side Inj?79
7.17.?Crossover Spurs - Low Side Inj?79
8.?Glossary?80
8.1.?Able Baker Spurs?80
8.2.?AGC?80
8.3.?AGC Control Voltage?81
8.4.?AGC Detector?81
8.5.?AGC Response?81
8.6.?AGC Attack?81
8.7.?AGC Decay?81
8.8.?Amplitude Modulation?81
8.9.?Analog Modulation?82
8.10.?Angular Deviation?82
8.11.?Bandwidth?82
8.12.?Baseband?82
8.13.?Baud Rate?82
8.14.?Birdie?82
8.15.?Bit Error Rate?83
8.16.?Bit Error Rate Plot?83
8.17.?Block Conversion?83
8.18.?Block Parameters?83
8.19.?BPSK?83
8.20.?Carrier to Noise?84
8.21.?Cascade?84
8.22.?Compression?84
8.23.?Converter?84
8.24.?Crossover Spurs?84
8.25.?Decibels?85
8.26.?Demodulator?85
8.27.?Digital Modulation?85
8.28.?Discriminator?85
8.29.?Double Sideband?85
8.30.?Double Sided Bandwidth?85
8.31.?Down Conversion?86
8.32.?Element?86
8.33.?Element Library?86
8.34.?Engineering Notation?86
8.35.?Envelope Detector?86
8.36.?Excess Noise?86
8.37.?Fixed Frequency Module?87
8.38.?Fixed IF?87
8.39.?Fixed LO?87
8.40.?FM Improvement?87
8.41.?FM Threshold?87
8.42.?Free Running Oscillator?88
8.43.?Frequency Deviation?88
8.44.?Frequency Modulation?88
8.45.?Frequency Plan?88
8.46.?Frequency Shift Keying?88
8.47.?Gain?88
8.48.?Gain Controlled Amplifier?89
8.49.?Harmonic?89
8.50.?IF Feedthrough?89
8.51.?Image Frequency?89
8.52.?Impedance Matching?89
8.53.?Injection Side?90
8.54.?Input Noise?90
8.55.?Input Signal?90
8.56.?Integrator?90
8.57.?Intercept Point?90
8.58.?Intermediate Frequency?90
8.59.?Intermodulation Distortion?91
8.60.?Isolation?91
8.61.?Linear Detector?91
8.62.?Local Oscillator?91
8.63.?Logarithmic Detector?91
8.64.?Mixer?92
8.65.?Modulation?92
8.66.?Modulation Depth?92
8.67.?Noise Bandwidth?92
8.68.?Noise Factor?92
8.69.?Noise Figure?92
8.70.?Phase Locked Loop?93
8.71.?Phase Modulation?93
8.72.?Phase Noise?93
8.73.?Preselector?93
8.74.?Product Detector?93
8.75.?QPSK?94
8.76.?RC Filter?94
8.77.?RF Module?94
8.78.?RF Module List?94
8.79.?Saturation?94
8.80.?Second Harmonic Distortion?95
8.81.?Second Harmonic Intercept Point?95
8.82.?Second Order Distortion?95
8.83.?Second Order Intercept Point?95
8.84.?Self Quieting Spurs?95
8.85.?Sideband?96
8.86.?Signal Handling Capabliity?96
8.87.?Signal to Noise?96
8.88.?Single Frequency?96
8.89.?Single Sideband?96
8.90.?Single Sided Bandwidth?97
8.91.?Single Signal Spurious?97
8.92.?Single Signal Spurious Plot?97
8.93.?Spurious Signals?97
8.94.?Synchronous Defector?97
8.95.?Synthesizer?97
8.96.?Third Order Distortion?98
8.97.?Third Order Intercept Point?98
8.98.?Time Constant?98
8.99.?Up Conversion?98
8.100.?Variable Frequency Module?98
This program and documentation (including this help file) are copyright 2000 by Gary A. Appel.
In this initial release (version 1.0), both the program and the documentation that accompanies the program, may be freely distributed in it's complete form, but not sold. All copyright statements must be included in the distributed package. A reasonable charge may be collected to cover the cost of copying and distributing the program. If a fee is collected for distribution of this software, the solicitation must make it clear that the software itself is free, and that the fee is solely for the cost of distribution.
Distribibution of any later versions will be subject to the copyright statement in that version. Use of this preliminary version does not give the user the right to obtain or execute later versions of this software. Use of later versions will be subject to the copyright statement included in the original release of that version.
This program was created using Borland C++ Builder (trademark of Inprise.)
Some of the components were obtained from Software Development Lohninger (SLD.)
The help files were prepared using Help & Manual, from EC software.