針對氣體滲碳零件質量不穩定問題,使用測氧傳感器對滲碳過程進行碳勢控制。結果
表明:單參數控制碳勢波動大的主要原因是爐氣中的CO 含量不恒定。根據滲碳設備、工藝等具體情況,可采用單一滲劑,配制混合滲劑,稀釋劑和富化劑按比例同步增減,以及用甲醇作稀釋劑,醋酸乙脂作富化劑等4 種處理。
關鍵詞:碳勢;測氧傳感器;滲碳;氧電勢;控制
Abstract :Carbon tendency cont rolled by single2factor method was unstable in theory because the amount of CO was unconstant . According to carburizing devices and technologies of factories , authors solved these problems by using single penet rant ,fixing different penet rant s ,increasing or decreasing the amount s of dilu2 ent s and enrich agent s in proportion and synchronization ,and using alcohol as diluent and acetic ether as en2
rich agent s. After these measures had been taken ,the qualities of accessories had been greatly improved.
Key words :Carbon tendency ;Oxygen sensor ; Gas carburizing ;Oxygen potential ;Cont rol