完善資料讓更多小伙伴認識你，還能領取20積分哦，立即完善>
NXP的電源開關提供電機驅動器/控制器集成電路，使用SMARTMOS技術用于工業應用。 mc34931（單）和 mc34932（雙）直流電機驅動器是單片高效的28V/5AH橋直流電機驅動器，具有實時負載電流監測和自動熱回?cái)?，確保高可用性運行在高電流，高溫工業應用。 它主要用于直流刷和伺服電機驅動器的應用。 該 mc34933是一個1.4A雙H橋驅動器瞄準數碼相機市場。 該 mc34937a是一種場效應晶體管(FET)預驅動器，用于三相電機控制和類似的應用。 該集成電路包含三個高側場效應管預驅動和三個低側場效應管預驅動。 三個外部自舉電容器為高側場效應管提供柵極電荷。
NXP公司的5.0A單片H橋電源集成電路是一款整體熱高效的28V/5A型H橋直流電機驅動器，具有實時負載電流監測和自動熱退關功能，在高電流、高溫工業應用中保證了高可用性。 它主要設計用于直流刷和伺服電機驅動器應用范圍內的電流和電壓限制在本規范規定。 該設備采用SMARTMOS技術供電。
查看產品列表
NXP's mc34932 Dual Monolithic H-Bridge Power IC consists of two monolithic thermally efficient 28V/5A H-Bridge DC motor drivers in the same package. It features real-time load current monitoring and automatic thermal back-off ensuring high availability operation in demanding high-current, high-temperature industrial applications. It is designed primarily for DC brushed and DC servo motor driver applications within the current and voltage limits stated in this specification. This device is powered by SMARTMOS technology.
查看產品列表
NXP mc34933 two channel H-Bridge driver is aimed at the digital camera market. mc34933 uses NXP's proprietary SMOS8 Bi CMOS process to deliver a low power device, with a maximum quiescent current of 100μA for the motor drive supply and 400μA for the control logic supply. This device has four operation modes: forward, reverse, brake, and tri-state (high-impedance). The 34933 employs a VCC detection circuit to sense when the logic supply switches to an off-state with a maximum current of 1uA to extend battery life.
查看產品列表
NXP's mc34937a Three Phase Field Effect Transistor Pre-Driver is designed for three-phase motor control and similar applications. The integrated circuit (IC) uses SMARTMOS technology. The IC contains three high side FET pre-drivers and three low side FET pre-drivers. Three external bootstrap capacitors provide gate charge to the high side FETs. The IC interfaces to a MCU via six direct input control signals, an SPI port for device setup and fault detection, an asynchronous reset, an interrupt and two enable signals. Both 5.0 and 3.0V logic level inputs are accepted and 5.0 V logic level outputs are provided.
查看產品列表
關注我們的微信
下載發燒友APP
電子發燒友觀察
版權所有 ? 長沙勒克斯教育咨詢有限公司
湖南省長沙市開福區月湖街道匍園路20號聚恒科技園1棟2301-1房
電子發燒友 （電路圖） 湘公網安備43011202000918
工商網監
湘ICP備2023036445號-105-1
